Help Us Fight Hunger! To Date, We Have Raised $7,884. Click Here to Learn More.

SYSTEM TUNE UPS AND MAINTENANCE

SERVING LOCAL FAMILIES, LIKE YOURS, FOR OVER 100 YEARS!

 

UGI Heating, Cooling & Plumbing offers system inspections, cleanings and tune-ups to assist you in your HVAC maintenance needs.

  • Central Air Conditioning Tune-Ups
  • Heating System Inspections
  • Heating System Full Cleanings
  • Fuel Line Inspection

We also offer UGI Advantage Service Agreements that include full coverage for a full year on all labor and most parts, and you can elect to include annual inspections and/or cleanings.

Click here, or on the image below, to see what is included in our AC tune ups.

Heating and A/C Inspection includes the following, where applicable:

  • Check and adjust belts
  • Check blower wheel
  • Check burner operation
  • Check and flush condensate drain
  • Check condensate pump
  • Check draft and/or chimney base
  • Check humidifier dampers
  • Check operation – limits and controls
  • Check air filters
  • Check temperature rise and drop over coils
  • Check water pressures
  • Check for worn or defective parts
  • Inspect & lubricate motors as needed
  • Inspect burners
  • Inspect capacitors
  • Inspect condenser coils and rise if necessary
  • Inspect contactor points inspect safety controls
  • Tighten electrical connections
  • Check thermostat
  • Prepare system for operation
  • Combustion testing
  • CO test
  • Confined space measurement
  • Discussion of findings and overall condition of unit

Air Conditioner or Air Conditioner/Heat Pump Tune-Up/Maintenance includes the following:

  • Check and adjust thermostat
  • Check air filters
  • Check belts and adjust tension
  • Check blower wheel
  • Check & flush condensate drain
  • Check condensate pump
  • Check for refrigerant and oil leaks
  • Check defrost
  • Check humidifier dampers
  • Check temperature rise and drop over coils
  • Check evaporator coil if possible
  • Inspect and adjust temperature controls
  • Inspect and lubricate motors as needed
  • Inspect contractor points
  • Inspect safety controls
  • Check and test any capacitors
  • Inspect condenser coils and clean if necessary
  • Check refrigerant level if needed
  • Tighten electrical connections
  • Prepare system for operation
  • Discussion of findings and overall condition of unit

Residential Heating Tune-Up/Maintenance + Cleaning includes the following, where applicable:

  • Remove metal vent pipe and inspect chimney base and clean as needed
  • Check PVC vent and intake piping where necessary
  • Check overall condition of chimney
  • Remove and clean burners
  • Inspect burners for rust and cracks
  • Remove and clean ignition system
  • Check micro-amp reading of flame sensor if applicable
  • Check thermostat for proper operation and adjust as needed
  • Clean heat exchanger and remove dust and debris
  • Remove and clean baffles
  • Inspect heat exchanger for rust, cracks and water leaks
  • Clean blower assembly if necessary
  • Check condition of blower wheel or circulator pump
  • Check and adjust belts/drive belt for wear or cracks
  • Check steam controls
  • Check boiler for proper water pressure
  • Check air filter and replace as needed (additional cost)
  • Check all controls and safeties for proper operation
  • Check fan speed for proper heat rise
  • Check for proper gas pressure and BTU input
  • Check motors for proper AMP draw
  • Check and test any capacitors
  • Lubricate motors/blower
  • Check for defective or worn parts
  • Check for proper venting of unit
  • Check for proper draft
  • Check ducts or boiler piping for proper installation
  • Check and flush condensate drain
  • Combustion testing
  • Confined space measurement
  • CO check
  • Discussion of findings and overall condition of unit

Contact us today, or call 1-877-844-4822